24-hour hot line:+86 189 1133 7382
GREEN  SAFETY  RELIABLE  EFFICIENT
sales@auwii.com
​​Committed to laboratory sample pretreatment and safety protection equipment R&D and manufacturing
New type of rotary evaporator manufacturer
来源: | Author:AUWII | time :2020-12-16 | 1180 Browse: | 分享到:
As a new type of rotary evaporator manufacturer, Beijing Huaaowei is committed to supplying array rotary evaporators for major laboratories. The biggest difference between this rotary evaporator and the traditional rotary evaporator is that it can process multiple samples at the same time, and because of its uniqueness The longitudinal axis design is only 125cm when matched with a rotary steaming or chiller with 5 mini rotary steaming units, which fully saves the space of the fume hood.

As a new type of rotary evaporator manufacturer, Beijing Huaaowei is committed to supplying array rotary evaporators for major laboratories. The biggest difference between this rotary evaporator and the traditional rotary evaporator is that it can process multiple samples at the same time, and because of its uniqueness The longitudinal axis design is only 125cm when matched with a rotary steaming or chiller with 5 mini rotary steaming units, which fully saves the space of the fume hood.

Array rotary evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It consists of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system. It can greatly improve the experiment while realizing multiple sample processing. Room space utilization.


The multiple miniRotars mounted on the Array Rotary Evaporator can be used at the same time, and also support independent operation. They can independently perform temperature setting, rotation speed adjustment, vacuum release and other operations without disturbing the normal operation of other rotary evaporator units.


Extreme mini-saving space

miniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8m standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


Array combination-improve efficiency

The special interface design of miniRotar allows multiple units to be used in parallel, a total of one vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples to improve work efficiency.


Each miniRotar can independently set the temperature, speed, time and other working parameters, and can independently raise and lower the sample bottle.


MiniRotar 500s has an independent quick release vacuum button, which can release the vacuum independently without affecting the normal operation of other miniRotars.


Regular work-reduce nursing

MiniRotar500s has the ability to work regularly. The working conditions and working time can be set according to experience. When the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, raise the sample bottle, get out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


Double protection-avoid pollution

miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contaminating the sample and ensure the accuracy of the analysis results.


with tail tube bottle-easy to observe

MiniRotar can be equipped with 50ml, 100ml sample bottles with tail tubes, which is convenient for observing the remaining volume of the sample and accurately judging the end point of sample evaporation.


Three-stage condensation-reduce emissions

The eSR series solvent recovery instrument can meet the needs of 6 miniRotar solvent vapor condensation recovery at the same time. The eSR320 solvent recovery instrument uses a low-temperature compressor for refrigeration. After the solvent vapor enters, it is collected by three-stage condensation and liquefaction to achieve efficient condensation recovery (excellent recovery rate of methylene chloride vapor Less than 98%), reduce the emission of solvent vapor, protect the laboratory environment, and care for the health of experimenters.


The eSR series solvent recovery instrument does not need to add any cooling circulating fluid, and does not require an external glass condenser, which reduces pipeline connections, does not require daily maintenance, and is simple to use. The internal pipeline of the solvent recovery instrument has super corrosion resistance and can withstand High concentration of chloride ions attack.


This new array rotary evaporator product has been purchased by many laboratory teachers, and Beijing Huaaowei, as a professional new energy laboratory rotary evaporator supplier, will bring more quality products to users in the future.