Good cooling effect industrial chillers, industrial chillers that face different cooling effect what difference does it make?

In indirect freezing cold refrigeration principle injection molding, plating (oxidation) industry are water basin bottoms conveyed through a cooling water pump to the chiller condenser to cool the condenser. When the flow back to the cooling tower and the lower spray of cooling water through the cooling fan on the top of the tower, and then flows back to the cooling pot bottoms. The condenser dissipates heat while the refrigerant inside is liquefied, then flows into the evaporator for evaporation, and absorbs heat during evaporation, thereby cooling the water in the water tank, and the cooled water is sent to the heat exchanger through the water pump (intermediately separated, The sulfuric acid is cooled by the process of heat transfer while the water is sulphuric acid, which is the process of indirect freezing of the industrial chiller.

Cold water type direct freezing In the electroplating (oxidation) industry, the principle of refrigeration is that the water in the bottom tank of the cooling tower is sent to the condenser of the chiller through the water pump to cool the condenser, and then flows back to the cooling tower to pass through the top of the cooling tower. The upper fan cools the water and then flows back to the cooling tower bottom basin. The condenser dissipates heat while the refrigerant inside is liquefied, and then flows into the evaporator for evaporation. When evaporating, heat is absorbed, so that the sulfuric acid (tank) in the cold gun is cooled, and the sulfuric acid after cooling is transported to the plating (oxidation) by the water pump. Slot, this is a cycle of direct freezing of industrial chillers.