24-hour hot line：+86 189 1133 7382
GREEN SAFETY RELIABLE EFFICIENT
sales@auwii.com
Committed to laboratory sample pretreatment and safety protection equipment R&D and manufacturing
商品描述
Array rotary evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It consists of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system. It can greatly improve the experiment while realizing multiple sample processing. Room space utilization.
Array rotary evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It consists of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system. It can greatly improve the experiment while realizing multiple sample processing. Room space utilization.
The multiple miniRotars equipped in the array rotary evaporator can be used at the same time and support independent operation. They can independently perform temperature setting, rotation speed adjustment, and vacuum release without interfering with the normal operation of other rotary evaporator units.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
The multiple miniRotars equipped in the array rotary evaporator can be used at the same time and support independent operation. They can independently perform temperature setting, rotation speed adjustment, and vacuum release without interfering with the normal operation of other rotary evaporator units.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
Extreme mini —— Saves Space
○ MiniRotar designs longitudinal rotating axis innovatively, reducing the product width to 25cm,
which is one third of traditional rotary evaporator. 1.8m standard fume hood can put up to 5 miniRotars, fully save the fume hood space.
Array Combination —— Improves Efficiency
○ Special connector design can keep multiple units working in parallel, sharing one Vacuum system and one Recovery system. Highly recommended on processing multiple samples at the same time to improve work efficiency.
○ Each miniRotar can set it's own temperature, rotation speed and time, and can independently lift and lower the flask. MiniRotar 500s equips an independent quick release vacuum button, which can release the vacuum independently without interfering other rotary evaporator units.
Timing of evaporation —— Less Attention
○ MiniRotar500s can setting it’s working time according to users experience. Once time is up, miniRotar500s will automatically stop rotating and release vacuum, lift the flask to part from water bath, and automatically stop sample evaporation and concentration.
Double Protection —— Avoid Contamination
○ MiniRotar is equipped with a backflow prevention connector, which can avoid contamination of samples and ensure the accuracy of analysis results.
○ MiniRotar designs longitudinal rotating axis innovatively, reducing the product width to 25cm,
which is one third of traditional rotary evaporator. 1.8m standard fume hood can put up to 5 miniRotars, fully save the fume hood space.
Array Combination —— Improves Efficiency
○ Special connector design can keep multiple units working in parallel, sharing one Vacuum system and one Recovery system. Highly recommended on processing multiple samples at the same time to improve work efficiency.
○ Each miniRotar can set it's own temperature, rotation speed and time, and can independently lift and lower the flask. MiniRotar 500s equips an independent quick release vacuum button, which can release the vacuum independently without interfering other rotary evaporator units.
Timing of evaporation —— Less Attention
○ MiniRotar500s can setting it’s working time according to users experience. Once time is up, miniRotar500s will automatically stop rotating and release vacuum, lift the flask to part from water bath, and automatically stop sample evaporation and concentration.
Double Protection —— Avoid Contamination
○ MiniRotar is equipped with a backflow prevention connector, which can avoid contamination of samples and ensure the accuracy of analysis results.
Product parameters and model list:
|
Rotary evaporator |
||
 |
||
| technical parameter | miniRotar500 |
miniRotar500s |
| Heating temperature range | Room temperature~95℃ |
Room temperature~95℃ |
| Temperature control accuracy | ±1℃ |
±1℃ |
| Temperature setting and display | Knob to quickly set the target temperature and real-time temperature digital display |
Knob to quickly set the target temperature and real-time temperature digital display |
| Dry burn protection mode | Automatic power off for dry burning |
Automatic power off for dry burning |
| heating method | Concealed heating |
Concealed heating |
| ※Rotation axis direction | Portrait setting |
Portrait setting |
| Rotation parameter setting and display | TFT4.3Inch touch LCD screen |
TFT4.3Inch touch LCD screen |
| Rotating screen lifting mode | Manual and automatic dual mode |
Manual and automatic dual mode |
| ※Timing function |
N/A |
YES （The time can be set within 0-999min. When the time is reached, the rotating bottle stops rotating. Automatically lift out of the heating water bath and release the vacuum at the same time, the sample stops evaporating） |
| Maximum volume of rotating bottle |
500mL |
500mL |
| Rotating bottle interface specifications |
standard 24/29 interface |
standard 24/29 interface |
| ※Rotation mode |
clockwise rotation |
Three modes: clockwise counterclockwise clockwise and counterclockwise alternately |
| ※Vacuum release method |
Manual switch valve to release vacuum |
Shortcut button to release vacuum （When multiple groups are used in parallel, the vacuum of one group of rotary evaporators is released without affecting the normal operation of other rotary evaporators） |
| Turn off the power and automatically release the vacuum | N/A | YES |
| ※Sample observation light |
USB interface led light |
USB interface led light |
| Suction port |
φ10mm Pagoda connector |
φ10mm Pagoda connector |
| Communication Interface | 无 |
RS485 |
| voltage |
AC220V 50/60Hz |
AC220V 50/60Hz |
| input power |
700W |
700W |
|
Dimensions（mm） |
deep 530×width 250×high 520 | |
|
Vacuum pump |
||
 |
||
| technical parameter | eV35 | eV35s |
|
Vacuum pump type |
High performance diaphragm vacuum pump |
German original diaphragm vacuum pump |
|
Diaphragm material |
PTFE |
PTFE |
|
Pump head material |
PTFE |
PTFE |
|
Ultimate vacuum |
8mbar |
8mbar |
|
Maximum pumping speed |
35L/min |
34L/min |
|
Pneumatic interface |
φ10mm Pagoda connector |
φ10mm Pagoda connector |
|
Vacuum gauge |
Pointer vacuum gauge |
Pointer vacuum gauge |
|
Vacuum control valve |
Precision hand-tightened vacuum control valve |
Precision hand-tightened vacuum control valve |
|
Vacuum adjustment range |
–0.1-0Mpa |
–0.1-0Mpa |
|
voltage |
AC220V 50/60Hz |
AC220V 50/60Hz |
|
input power |
240W |
245W |
|
Maximum load |
Can be equipped with up to 6 sets of mini rotary evaporation units |
Can be equipped with up to 6 sets of mini rotary evaporation units |
|
Dimensions（mm） |
deep 350×width 170×high 350 | |
|
Vacuum controller |
||
 |
||
| technical parameter | eC35 |
eC35s |
|
Vacuum degree control range |
20-1050mbar |
10-1050mbar |
|
Vacuum setting accuracy |
1mbar |
1mbar |
|
Vacuum degree control accuracy |
5mbar |
2mbar |
|
Display screen |
5 inch TFT touch screen |
5 inch TFT touch screen |
|
Vacuum control order |
5 |
5 |
|
Material contact part material |
316 stainless steel |
PEEK、PTFE、Perfluoroether rubber、PFA |
|
Vacuum pump power control |
N/A |
Can control the start/stop of the vacuum pump |
|
Communication Interface |
N/A |
RS485 |
|
Pneumatic interface specifications |
316 stainless steel φ10mm Pagoda connector |
PEEK φ10mm Pagoda connector |
|
voltage |
AC100-230V,50/60Hz |
AC100-230V,50/60Hz |
|
input power |
50W |
50W |
|
Dimensions（mm） |
deep 240×width 160×high170 | |
|
Solvent recovery instrument |
||
 |
||
| technical parameter | eSR220s | eSR320s |
|
Condensation stages |
Two levels |
three levels |
|
lowest temperature |
-20℃ |
-20℃ |
|
Number of bottles collected |
One |
Two |
|
Total volume of collection bottle |
2000ml |
3000ml |
|
Condenser coil material |
Special material （Able to withstand chloride ion attack） |
Special material （Able to withstand chloride ion attack） |
|
Pneumatic interface specifications |
PEEK φ10 Pagoda connector |
PEEK φ10 Pagoda connector |
|
rated power |
500W |
500W |
|
voltage |
AC220V 50Hz |
AC220V 50Hz |
|
Dimensions（mm） |
deep 510×width 240×high 660 |
deep 510×width 340×high 710 |
|
Glass condenser |
|
 |
|
| technical parameter | GL1000 |
|
Material |
Borosilicate glass |
|
Suction port |
φ10mm Pagoda connector |
|
Waterway interface |
φ10mm Pagoda connector |
|
Collection bottle volume |
1000ml |
|
Condenser tube surface area |
0.2㎡ |
|
a fixed way |
V35、V35sVacuum pump and T series Cooling circulating water machines have GL1000 installation interface， Can be easily suspended and fixed |
- 购买人 会员级别 数量 属性 购买时间
总计 0 条记录
- 商品满意度 ：
-
暂无评价信息
Find more info from
Copyright © Auwii Instrument Co. Ltd. All Rights Reserved.
Application
LINK
Just waiting for you！
Auwii Instrument Co. Ltd.
Tel: +86 10 8178 9901 / 9902
Fax: +86 10 8178 7012 / 7013
Mob:+86 189 1133 7382
E-MAIL:sales@auwii.com
Add:4030, Building B, Hongfu International Innovation Center, Changping District, Beijing 102209
Navigation